| 1 | | = How do I do a network based installation from kiyoshi? = |
| 2 | | |
| 3 | | kiyoshi is configured to offer a Debian Etch or Debian Lenny installer via the network (via tftp) in our Telehouse location (see steps to do this in [wiki:pxeboot_from_naomi XO/Bandcon]). |
| 4 | | |
| 5 | | If you would like to use it, follow these steps: |
| 6 | | |
| 7 | | * Find the network cable plugged into the bottom network card on kiyoshi. |
| 8 | | * Plug this cable into the nic of the server you want to install debian on. |
| 9 | | * Configure the target server to boot from the network device |
| 10 | | * You should be all set. Note: when the debian installer begins, you can unplug the network cable, and plug in a cable connecting the server to the real network for the completion of the installation. |
| | 1 | This page has been [wiki:pxe_boot_from_telehouse moved to a new location]. |
