Version 7 (modified by 12 years ago) ( diff ) | ,
---|
How do I do a network based installation from kiyoshi?
kiyoshi is configured to offer a Debian Etch or Debian Lenny installer via the network (via tftp) in our Telehouse location (see steps to do this in XO/Bandcon).
If you would like to use it, follow these steps:
- Find the network cable plugged into the bottom network card on kiyoshi.
- Plug this cable into the nic of the server you want to install debian on.
- Configure the target server to boot from the network device
- You should be all set. Note: when the debian installer begins, you can unplug the network cable, and plug in a cable connecting the server to the real network for the completion of the installation.
Note:
See TracWiki
for help on using the wiki.