Changes between Version 86 and Version 87 of telehouse_serial_access


Ignore:
Timestamp:
Feb 8, 2019, 8:45:12 AM (2 months ago)
Author:
Jamie McClelland
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • telehouse_serial_access

    v86 v87  
    1717Otherwise, follow the serial console instructions
    1818
     19To setup a new ipmi server, see the [wiki:ipmi ipmi setup directions].
     20
    1921== IPMI ==
    2022
     
    2325==== Serial Console ====
    2426
    25 You can connect using serial over lan, however, for some reason the linux kernel output doesn't work so you can't enter the decryption passphrase unless you use the web based method described below.
    26 
    27 Nonetheless... you can ssh in as `john-console@console.mayfirst.org` and execute the `./sol` script. The password is in keyringer.
     27You can ssh in as `john-console@console.mayfirst.org` and execute the `./sol` script. The password is in keyringer.
    2828
    2929==== Full access ====
     30
    3031First, ssh into robideau and enable nginx. This will enable ipmi access via https (via nginx proxy).
    3132
     
    4142read -p "Copy password to clipboard then hit any key" && data=$(xclip -o) && printf "Hover mouse over iKVM window and wait 5 seconds.\n" && sleep 5 && xdotool type "$data"
    4243}}}
    43 
    44 === IPMI setup ===
    45 
    46 If you are setting up IPMI on a new server:
    47 
    48  * The default IPMI password is user: ADMIN, pass: ADMIN (case sensitive)
    49  * The password length is limited to 16 characters. Don't try to create a longer one or you will lock yourself out.
    50  * You have to connect first over https (and confirm an exception). Then under congiruation -> ports, disable redirect to https and only enable http and ikvm server port
    51  * Assign an IP address in the range 192.168.56. range
    52  * Create a new nginx configuration file on robideau (check /etc/nginx/sites-available for a template)
    5344
    5445== Serial Console ==