Changes between Initial Version and Version 1 of pxeboot_from_naomi


Ignore:
Timestamp:
Jan 27, 2009, 6:39:52 PM (13 years ago)
Author:
Jamie McClelland
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • pxeboot_from_naomi

    v1 v1  
     1= How do I do a network based installation from naomi? =
     2
     3naomi is configured to offer a Debian Lenny installer via the network (via tftp) in our XO/Bandcon location (see steps to do this in [wiki:pxeboot_from_leslie Telehouse]).
     4
     5If you would like to use it, follow these steps:
     6
     7 * Login to naomi as root.
     8 * Run /root/bin/enable-pxe-netboot
     9 * Plug a network cable into naomi's eth2 port
     10 * Plug this cable into the nic of the server you want to install debian on.
     11 * Configure the target server to boot from the network device
     12 * You should be all set. Note: when the debian installer begins, you can unplug the network cable, and plug in a cable connecting the server to the real network for the completion of the installation.
     13 * Lastly, run /root/bin/disable-pxe-netboot on naomi.