Version 4 (modified by 16 years ago) ( diff ) | ,
---|
How do I do a network based installation from leslie?
leslie is configured to offer a Debian Etch or Debian Lenny installer via the network (via tftp).
If you would like to use it, follow these steps:
- Login to leslie as root.
- Run /root/bin/enable-pxe-netboot
- Find the network cable plugged into the bottom network card on leslie (leslie is the bottom-most server in the cabinet). It should not be plugged into anything.
- Plug this cable into the nic of the server you want to install debian on.
- Configure the target server to boot from the network device
- You should be all set. Note: when the debian installer begins, you can unplug the network cable, and plug in a cable connecting the server to the real network for the completion of the installation.
- Lastly, run /root/bin/disable-pxe-netboot on leslie.
NOTE: booting to lenny is currently broken since the available initrd at the moment (2008-10-21) uses kernel 2.6.24 whereas the lenny archives only have kernel modules for 2.6.26.
Note:
See TracWiki
for help on using the wiki.