How do I do a network based installation in Telehouse?

robideau is configured to offer a Debian jessie installer, jesie debirf and memtest via the network (via tftp) in our Telehouse location.

If you would like to use it, follow these steps:

• Determine the MAC address of the network device you are using
• On robideau,
  • Edit /etc/dhcp/dhcpd.conf and add a stanza for the server so it is "known"
  • start the DHCP server:

    /etc/init.d/isc-dhcp-server start
    

• Configure the target server to boot from the network device
• You should be all set.