Changes between Version 5 and Version 6 of ipmi


Ignore:
Timestamp:
May 16, 2019, 1:26:20 PM (3 years ago)
Author:
Jamie McClelland
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • ipmi

    v5 v6  
    2626[[Image(6.advanced-console-redirection-settings-second.png​)]]
    2727[[Image(7.ipmi-settings.png)]]
     28
     29== Setup IPMI ==
     30
     31Now, you can access the IPMI web configuration. But... by default it will redirect http to https. That messes up the proxy via nginx thing so we have to turn that off.
     32
     33Set your computer which is in the cabinet and plugged into the swtich to use an IP address in the same network, e.g.:
     34
     35{{{
     36sudo ip addr add 192.168.56.99/24 dev enp1s0f2
     37}}}
     38
     39Then, point your browser to the IP address you assigned the IPMI server above and click through the self-signed certificate warnings.
     40
     41The default user pass is: ADMIN/ADMIN - case sensitive!
     42
     43Here are some important changes:
     44
     45 * Configuration -> Users
     46 * Change password for ADMIN user. **NOTE** make password 16 characters or less and keep out weird characters. It is possible to lock yourself out with this step.
     47 * Configuration -> Port
     48 * Only check off Web port (80) and Ikvm server port (5900)
     49
     50Now, you can access the "monitor" by clicking Remove Control -> iKVM/HTML5
    2851
    2952== Enable http redirections ==
     
    87110And, of course, you need to create a DNS record so that a domain (e.g. `ipmi.john.mayfirst.org`) points to robideau's IP address.
    88111
    89 == Setup IPMI ==
    90112
    91 Now, you can access the IPMI web configuration.
    92 
    93 The default user pass is: ADMIN/ADMIN - case sensitive!
    94 
    95 Here are some important changes:
    96 
    97  * Configuration -> Users
    98  * Change password for ADMIN user. **NOTE** make password 16 characters or less and keep out weird characters. It is possible to lock yourself out with this step.
    99  * Configuration -> Port
    100  * Only check off Web port (80) and Ikvm server port (5900)
    101 
    102 Now, you can access the "monitor" by clicking Remove Control -> iKVM/HTML5
    103113
    104114== So-called Serial access ==