Changes between Version 9 and Version 10 of install_debian/server

Timestamp:

May 20, 2014, 1:04:08 PM (10 years ago)

Author:

Jamie McClelland

Comment:

--

install_debian/server

@@ -1 +1 @@
 = Server Installation
-
 
 == Initial steps ==
@@ -32 +31 @@
 === Details ===
 
-  Since we are using disks at are 2TB or bigger, we need to ensure that the partitions are created properly. Open a new ssh session and choose to switch to console.
+  Since we are using disks at are 2TB or bigger, we need to ensure that the partitions are created properly. Also, we leave 100MB at the end in case a replacement disk is a smidge smaller (thanks bug magnet!). Open a new ssh session and choose to switch to console.
 {{{
 parted /dev/sda -- mklabel gpt
@@ -39 +38 @@
 parted /dev/sda -- unit s mkpart boot 16384 1015807
 parted /dev/sda -- set 2 raid on 
-parted /dev/sda -- unit s mkpart pv 1015808 -1 
+parted /dev/sda -- unit s mkpart pv 1015808 -196608 
 parted /dev/sda -- set 3 raid on 
+}}}
 
-parted /dev/sdb -- mklabel gpt
-parted /dev/sdb -- unit s mkpart biosboot 8192 16383 
-parted /dev/sdb -- set 1 bios_grub on 
-parted /dev/sdb -- unit s mkpart boot 16384 1015807
-parted /dev/sdb -- set 2 raid on 
-parted /dev/sdb -- unit s mkpart pv 1015808 -1 
-parted /dev/sdb -- set 3 raid on 
-}}}
+Repeat for sdb, sdc, and sdd.
 
 When done, type:
@@ -55 +48 @@
 {{{
 parted /dev/sda -- unit s p
-parted /dev/sdb -- unit s p
 }}}
 
@@ -82 +74 @@
 
 {{{
-mdadm --create --raid-devices=4 --level=1 --metadata=1.0 --verbose /dev/md0 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
-mdadm --create --raid-devices=4 --level=10 --metadata=1.0 --verbose /dev/md1 /dev/sda3 /dev/sdb3 /dev/sdc3 /dev/sdd3
+mdadm --create --raid-devices=4 --level=1 --metadata=1.0 --verbose /dev/md0 /dev/sd[abcd]2 
+mdadm --create --raid-devices=4 --level=10 --metadata=1.0 --verbose /dev/md1 /dev/sd[abcd]3
 }}}