Changes between Version 4 and Version 5 of faq/email/setup-thunderbird

Timestamp:

Mar 4, 2010, 7:20:59 PM (15 years ago)

Author:

Erika Owens

Comment:

--

faq/email/setup-thunderbird

@@ -25 +25 @@
 Thunderbird will tell you you are done, but you aren't! Sorry. 
 
-Once your settings are in place, you'll have to make some final configuration changes. You'll need to make sure the "SSL" button is checked, which will change to default port to 993 (if you are using IMAP) or 995 (if you are using POP).
+Once your settings are in place, you'll have to make some final configuration changes. You'll need to make sure the "SSL" button is checked, which will change to default port to 993 (if you are using IMAP) or 995 (if you are using POP). 
 
 You should also look over the other settings and adjust them to meet your needs. 
@@ -35 +35 @@
 [[Image(thunderbird6.png)]]
 
-Next configure your outgoing server (smtp). If you are using a MF/PL server, make sure the outgoing port is set to 587.
+Next configure your outgoing server (smtp). If you are using a MF/PL server, make sure the outgoing port is set to 587. NOTE: If you are installing Thunderbird 3.0 you should select "STARTTLS" and make sure "secure authentication" is not checked. The other settings remain the same.
 
 [[Image(thunderbird7.png)]]