wiki:configure-hp-pro-curve

Version 6 (modified by Jamie McClelland, 4 years ago) (diff)

--

Configure HP Procurve 2824 (J4903A)

We have a HP Procurve 2824 switch at both Telehouse and XO. We have the manual available.

Reset to factory defaults and set serial console

Do that by poking a staple in both the reset and clear buttons and then releasing the reset button and keeping the clear button pressed. That may leave the switch in a state with all lights on. If so try unplugging and plugging it back in.

Next, try to access it via the serial console at 2400 baud.

  • Set the system contact, password, and IP configuration
    • Type: setup
    • Set system contact to: info@mayfirst.org
    • Enter Manager password - cannot be more than 16 characters!
  • Set the serial console
    # configure
    # console baud-rate 115200
    Command will take effect after saving configuration and reboot.
    # write mem
    # boot
    

After it restarts, you should re-connect via the new serial console settings

Upgrade Firmware

As for 2012-11-3, the latest firmware on the site is i.10.77 built on 26-Aug-2009, posted on 26-Oct-2009.

  • To update the firmware:
    • Downloading the latest version to a machine connected to the switch
    • Install and start tftpd-hpa on the machine
    • On the server, type:

menu

  • Selected Download OS from the menu
  • Entered the IP address of the server and the remote file name (/srv/tftp/I_10_77.swi) and hit eXecute.
  • Set the hostname
    hostname cafiero
    

Harden the switch

  • Disable the telnet and web interface:
    configure
    no telnet-server
    no web-management
    
  • Fix the SNMP configuration (by default it allows public write access, we want public read-only access)
    configure
    snmpv3 enable
    snmpv3 only
    

Ticket Resolution Summary

Attachments (1)