Bios Changes

We make the following changes to our server Bios/Startup configurations:

• Redirect output to serial console
  • For Dell
    • Serial Communication:
      • Serial Communication: On with Console Redirection via COM1
      • Redirection after boot: disabled
• Ensure virtualization is enabled (Process settings)
• Ensure that the disks that are installed are detected
• Boot settings: Only booting from disk
• Disabled PXE option from Integrated Devices
• Do not report keyboard errors
• Disable F1/F2 prompt on error
• AC Power recovery (either last or on)

With Dells - hitting F10 brings up the Unified Server Congifurator which runs hardware diagnostics and other Enterprise crap we don't need.

BMC Firmware: hit ctl-e to change the configuaration.

• System Services: disabling this setting turns off the F10 menu item (we left it enabled)
• LAN User Configuration - Account Access: we changed to disabled and IMPI LAN privilege to No Access to prevent it from trying to get a IP address
• Scroll to bottom - IPV4 - disable