= How do I do a network based installation from kiyoshi? = leslie is configured to offer a Debian Etch or Debian Lenny installer via the network (via tftp) in our Telehouse location (see steps to do this in [wiki:pxeboot_from_naomi XO/Bandcon]). If you would like to use it, follow these steps: * Find the network cable plugged into the bottom network card on kiyoshi. * Plug this cable into the nic of the server you want to install debian on. * Configure the target server to boot from the network device * You should be all set. Note: when the debian installer begins, you can unplug the network cable, and plug in a cable connecting the server to the real network for the completion of the installation.