= How do I do a network based installation from leslie? =

leslie is configured to offer a Debian Etch installer via the network.

If you would like to use it, follow these steps:

 * Login to leslie as root.
 * Run /root/bin/enable-pxe-netboot
 * Find the network cable plugged into the bottom network card on leslie (leslie is the bottom-most server in the cabinet). It should not be plugged into anything. 
 * Plug this cable into the nic of the server you want to install debian on.
 * Configure the target server to boot from the network device
 * You should be all set. Note: when the debian installer begins, you can unplug the network cable, and plug in a cable connecting the server to the real network for the completion of the installation.