Changes between Version 3 and Version 4 of bios_changes

Timestamp:

Oct 15, 2012, 4:22:51 PM (13 years ago)

Author:

Daniel Kahn Gillmor

Comment:

--

bios_changes

@@ -8 +8 @@
     * Serial Communication: On with Console Redirection via COM1
     * Redirection after boot: disabled
- * Ensure virtualization is enabled (Process settings)
- * Ensure that the disks that are installed are detected (NOTE: if you are using a disk controller, your disks may be plugged into the controller, not directly into the sata ports that the server knows about. So - if bios doesn't see disks, don't panic, keep bios configured to "off" for the Sata ports)
+ * Ensure virtualization is enabled (Processor settings)
+ * Ensure that the disks that are installed are detected (NOTE: if you are using a disk controller, your disks may be plugged into the controller, not directly into the sata ports that the server knows about. So - if bios doesn't see disks, don't panic, keep bios configured to "off" for the SATA ports)
+ * ensure any SATA ports in use are in AHCI mode, not IDE or Compatibility mode.
  * Boot settings: Only booting from disk 
  * Disabled PXE option from Integrated Devices